- Desktoppr 1 82 – Create Dynamic Desktops For Sale
- Desktoppr 1 82 – Create Dynamic Desktops -
- Desktoppr 1 82 – Create Dynamic Desktops Computers
- Desktoppr 1 82 – Create Dynamic Desktops Wallpaper
Summary :
If all hard disk partitions become dynamic disk volume, what should you do to convert the dynamic disk to basic? Here in this post, we list 3 solutions to help you get through this issue.
This program grabs the file that is the desktop image, adds the requested information to the image, saves it as a temp file, and applies that file as the background. Also, it seems to act a little funky when the resolution of the computer is changed. Those things, plus a few others aside, BGinfo will do what you are asking. In the previous post here, you might have seen the basic process to create Azure AD dynamic user and device groups along with the explanations about the syntax of the queries/rules. I have a feeling like we will also get some performance issues with Azure AD dynamic groups when we don't design our queries properly. Remote Desktop is a feature of Microsoft Windows that allows a user to take control and access a remote computer or virtual machine over a network connection. Learn how easy it is to use Remote Desktop with the new my.noip.com in this support guide. Step 1: Create an account. To create an account with No-IP simply click the ' Sign Up ' link at the top of the page. The desktop pool feature uses templates, Microsoft Sysprep and the guest customization configurations (Figure 3) to automate the bulk creation of virtual desktops. As such, I always test my templates and the guest customization configurations to make sure they work before even thinking about creating a virtual desktop pool.
Quick Navigation :
I was trying to extend an HDD and a popup appeared about the disk becoming dynamic. I thought it was referring to the free space disk, meaning the free space disk would first become dynamic then it would be extended on the HDD. But no, it converted the whole HDD to dynamic! Now, Windows loads everything OK. The drive this occurred on is the data drive which stores all programs and users data. All data is backed up. However, I really do not wish to backup and restore would be a big hassle. Any way to convert back to basic without losing data? --from sevenforums
What Is Dynamic Disk
What is a dynamic drive? Basic disk and dynamic disk are two types of disks when referring to storage types. Like basic disk, which is most commonly used on computers running Microsoft Windows, dynamic disk can also use the master boot record (MBR) or GUID partition table (GPT) partitioning scheme.
All volumes on dynamic disks are known as dynamic volumes. There are 5 types of dynamic volumes, and they are: Simple Volume, Mirrored Volume, Striped Volume, Spanned Volume and RAID-5 Volume. To get more information, please refer to What Are Dynamic Disks and Volumes?
Theoretically, you can create up to 1,000 dynamic volumes per disk group, however, it is recommended to create at most 32 or fewer per disk group. And, to gain the maximum benefit from dynamic disks and volumes, it is best to use them in computers with multiple disks, which allows us to scale the storage to match our needs.
3 Situations Where Hard Disk Will Become Dynamic
If one of the following 3 assumptions is true, a basic hard disk will become dynamic disk:
- If you want to create a new partition in unallocated space when there have been 4 primary partitions on an MBR disk, creating partition will convert basic disk to dynamic.
- On non-system disk, you want to extend a partition on basic disk but there is no contiguous unallocated space or free space on the right side. At this time, if a dynamic disk exists, extending partition will convert this basic disk to dynamic disk.
- You just mistakenly converted hard disk to dynamic disk by clicking the option 'Convert to Dynamic Disk'.
Of course, after hard disk changed to dynamic disk, you can create much more simple volumes which function like basic partitions; or you can create advanced volumes like mirrored volume, spanned volume, and striped volume when there is more than one dynamic disk.
Nevertheless, dynamic disk may bring some problems. For instance, some operating systems cannot be installed on dynamic disk, including Ubuntu and a small part of Windows operating systems. For Windows OS that does not support dynamic disk, please see Does Windows 7 Support Dynamic Disks.
Besides, you can perform a fresh Windows installation on a dynamic volume only if that volume was converted from a basic volume and retained an entry in the partition table. Simple volumes converted from basic disks do not have an entry in the partition table unless they were system or boot volumes prior to conversion.
Therefore, probably you may want to know 'how can I convert a dynamic disk to basic disk? Receiptbox 2 3 1.
Just keep reading.
3 Ways to Convert Dynamic Disk to Basic
In general, there are 2 FREE solutions to convert dynamic disk to basic in windows 7/8/10. You can use Windows Disk Management and Command Prompt (CMD) to revert a dynamic disk to basic, but they all require deleting existing volumes.
Here are the details to follow if you plan to use them to convert dynamic disk to basic:
Fix 1: Use Windows Disk Management to Convert
In Disk Management, just delete all volumes one by one and then the dynamic disk can be turned into basic disk.
Please do the followings if your hard disk has become dynamic:
Step 1. Run diskmgmt.msc to load Disk Management directly, or you can right click 'My Computer/This PC', select 'Manage' - 'Storage' - 'Disk Management'.
Step 2. Right click on a dynamic volume and choose Delete Volume… Continue deleting volumes until the whole hard disk displays as Unallocated.
Step 3. Depending on the operating system you are using, after the deletions, the dynamic disk will become basic disk automatically; or you still need to right-click the dynamic disk and then choose Convert to Basic Disk.
Now all is done.
To avoid these, please resort to Fix 3.
Fix 2: Use Command Prompt to Convert
Command Prompt, also known as cmd, or cmd.exe, is the command-line interpreter on Windows NT, Windows CE, OS/2 and eComStation operating systems. Although more and more Windows tools emerge on the software market, cmd is never outdated, because it is a so much powerful Windows tool to achieve a lot of goals.
Well, how to convert dynamic disk to basic disk using CMD?
Run Command Prompt as administrator. Then in the command prompt window, type these commands successively:
- diskpart
- list disk
- select disk n (n is the number of the dynamic disk you want to convert)
- detail disk
- select volume n (n is the number of the selected volume)
- delete volume (If there is more than 1 volume, just delete them one by one until all volumes on the disk are removed.)
- select disk n
- convert basic
Please note that every type should end up with Enter key. Finally, you can type exit to leave CMD.
To avoid this error message, please refer to Fix 3.
Well then, how to convert hard disk from dynamic to basic without losing data? Is there an easy and safe solution? Insanity workout free online mac. Of course, there is. That is to make use of the partitioning software - MiniTool Partition Wizard.
Fix 3: Lossless Scheme - Use MiniTool Partition Wizard to Convert
Designed by MiniTool Software Ltd., MiniTool Partition Wizard is a professional hard disk manager that helps users to manage hard disk and partitions in a better way. No matter you are troubled by low disk space warning, mistaken diskpart clean, BOOTMGR is missing, Windows was unable to complete the format, etc., this partition magic can help you safely and quickly address the issue.
Theoretically, you can create up to 1,000 dynamic volumes per disk group, however, it is recommended to create at most 32 or fewer per disk group. And, to gain the maximum benefit from dynamic disks and volumes, it is best to use them in computers with multiple disks, which allows us to scale the storage to match our needs.
3 Situations Where Hard Disk Will Become Dynamic
If one of the following 3 assumptions is true, a basic hard disk will become dynamic disk:
- If you want to create a new partition in unallocated space when there have been 4 primary partitions on an MBR disk, creating partition will convert basic disk to dynamic.
- On non-system disk, you want to extend a partition on basic disk but there is no contiguous unallocated space or free space on the right side. At this time, if a dynamic disk exists, extending partition will convert this basic disk to dynamic disk.
- You just mistakenly converted hard disk to dynamic disk by clicking the option 'Convert to Dynamic Disk'.
Of course, after hard disk changed to dynamic disk, you can create much more simple volumes which function like basic partitions; or you can create advanced volumes like mirrored volume, spanned volume, and striped volume when there is more than one dynamic disk.
Nevertheless, dynamic disk may bring some problems. For instance, some operating systems cannot be installed on dynamic disk, including Ubuntu and a small part of Windows operating systems. For Windows OS that does not support dynamic disk, please see Does Windows 7 Support Dynamic Disks.
Besides, you can perform a fresh Windows installation on a dynamic volume only if that volume was converted from a basic volume and retained an entry in the partition table. Simple volumes converted from basic disks do not have an entry in the partition table unless they were system or boot volumes prior to conversion.
Therefore, probably you may want to know 'how can I convert a dynamic disk to basic disk? Receiptbox 2 3 1.
Just keep reading.
3 Ways to Convert Dynamic Disk to Basic
In general, there are 2 FREE solutions to convert dynamic disk to basic in windows 7/8/10. You can use Windows Disk Management and Command Prompt (CMD) to revert a dynamic disk to basic, but they all require deleting existing volumes.
Here are the details to follow if you plan to use them to convert dynamic disk to basic:
Fix 1: Use Windows Disk Management to Convert
In Disk Management, just delete all volumes one by one and then the dynamic disk can be turned into basic disk.
Please do the followings if your hard disk has become dynamic:
Step 1. Run diskmgmt.msc to load Disk Management directly, or you can right click 'My Computer/This PC', select 'Manage' - 'Storage' - 'Disk Management'.
Step 2. Right click on a dynamic volume and choose Delete Volume… Continue deleting volumes until the whole hard disk displays as Unallocated.
Step 3. Depending on the operating system you are using, after the deletions, the dynamic disk will become basic disk automatically; or you still need to right-click the dynamic disk and then choose Convert to Basic Disk.
Now all is done.
To avoid these, please resort to Fix 3.
Fix 2: Use Command Prompt to Convert
Command Prompt, also known as cmd, or cmd.exe, is the command-line interpreter on Windows NT, Windows CE, OS/2 and eComStation operating systems. Although more and more Windows tools emerge on the software market, cmd is never outdated, because it is a so much powerful Windows tool to achieve a lot of goals.
Well, how to convert dynamic disk to basic disk using CMD?
Run Command Prompt as administrator. Then in the command prompt window, type these commands successively:
- diskpart
- list disk
- select disk n (n is the number of the dynamic disk you want to convert)
- detail disk
- select volume n (n is the number of the selected volume)
- delete volume (If there is more than 1 volume, just delete them one by one until all volumes on the disk are removed.)
- select disk n
- convert basic
Please note that every type should end up with Enter key. Finally, you can type exit to leave CMD.
To avoid this error message, please refer to Fix 3.
Well then, how to convert hard disk from dynamic to basic without losing data? Is there an easy and safe solution? Insanity workout free online mac. Of course, there is. That is to make use of the partitioning software - MiniTool Partition Wizard.
Fix 3: Lossless Scheme - Use MiniTool Partition Wizard to Convert
Designed by MiniTool Software Ltd., MiniTool Partition Wizard is a professional hard disk manager that helps users to manage hard disk and partitions in a better way. No matter you are troubled by low disk space warning, mistaken diskpart clean, BOOTMGR is missing, Windows was unable to complete the format, etc., this partition magic can help you safely and quickly address the issue.
Desktoppr 1 82 – Create Dynamic Desktops For Sale
MiniTool Partition Wizard has 6 editions, and they are Free Edition, Pro Edition, Pro Ultimate Edition, Server Edition, Enterprise Edition, and Technician Edition. By now the Free Edition has been downloaded by over 20,000,000 users on CNET due to its ease-of-use.
When your hard disk change to dynamic disk, you can rely on MiniTool Partition Wizard to convert dynamic disk to basic disk. Here we recommend using the Pro Edition. Click the buttons below to get it with the best prices here:
Desktoppr 1 82 – Create Dynamic Desktops -
After installing and registering this dynamic disk converter, please follow the steps below:
Step 1. Launch MiniTool Partition Wizard to get its main interface. Then select the dynamic disk which will be converted from the disk map and choose Convert Dynamic Disk to Basic from the action panel or from the drop-down list of Disk on the menu bar.
Step 2. You can preview that all volumes on the target disk have become partitions on basic disk. Now you can click Apply button on the top to apply all changes.
After changes have been completed, the computer will reboot normally, which shows the problem that 'hard disk has become dynamic' is solved safely and successfully. For detailed steps and corresponding thumbnails, see Convert Dynamic Disk to Basic.
If the dynamic disk was an MBR disk and there are more than 4 simple volumes created, the conversion may fail. At this time, try shrinking a little space from each volume and then you can finish the conversion.
Copy Dynamic Disk to Basic Disk
You see MiniTool provides the straightforward way to help convert dynamic disk to basic disk when you mistakenly converted hard disk to dynamic disk, but this is not the whole story. In fact, it is able to back up dynamic volumes/disks to basic disk. Here we would like to introduce how to convert a dynamic disk to a basic disk using Copy Disk feature.
Step 1. On the main interface of MiniTool Partition Wizard, select Copy DiskWizard from the action panel.
Download outlook for macbook air. Step 2. Skip the welcome page by clicking Next.
Step 3. Choose the dynamic disk you want to copy as the source disk. Then hit Next to go on.
Step 4. Select a location to hold all data on the source dynamic disk. Be aware that all data on the target disk will be removed. So, a backup in advance may be significant if there are important data on it.
Step 5. Depending on what partition style the source disk employs, you will see different options offered on the next page.
If the target disk is an MBR disk, there are 3 options for you:
If the target disk is a GPT disk, there are 2 options for you.
After you have made the selection, click Next and continue.
Step 6. MiniTool Partition Wizard tells how to boot from the new disk. Since we have said this way is suitable for data disk clone, you can just ignore and press Finish button.
Step 7. Finally, you can press Apply button on the tool bar to execute this task. Please wait patiently until MiniTool Partition Wizard finishes.
Ok, that's how to convert dynamic disk to basic disk using Copy Disk feature. The advantage here is, you don't need to back up and delete the source data on the dynamic disk. And you don't need to worry whether the conversion is successful because all the source data are still there on the dynamic disk. Amazing, right? Just use MiniTool Partition Wizard to do the copy!
Bottom Line
Reading here, you must know what is a dynamic disk, why a hard disk has become dynamic, and how to convert dynamic hard disk to basic in Windows 7/8/10 using 3 ways. After doing the conversion, you can get rid of dynamic hard disk problem and keep managing hard drives in a familiar way. Hopefully, these contents are helpful to you.
If you have any questions towards using MiniTool Partition Wizard, leave us comments in the lower part or email to [email protected]. We read every thread!
On this page you will find an overview of most of the available .rdp file settings which can be used with the /o command line switch. https://torrentheart.mystrikingly.com/blog/syndicate-mac-download.
Desktoppr 1 82 – Create Dynamic Desktops Computers
All settings must be specified using the .rdp file style syntax:
option:type:value
Desktoppr 1 82 – Create Dynamic Desktops Wallpaper
Examples:
alternate shell:s:notepad.exe
keyboardhook:i:2
Note: The information in this overview is largely compiled from this article at the Microsoft TechNet site. Ios dev center apple developer.
Use the search box on the left to search and filter keywords.
Setting | Type | Default value | Description and possible values | Settable from RDC GUI? | RDP+ equivalent | 5.1 | 5.2 | 6.0 | 6.1 | 7.0 | 7.1 | 8.0 | 8.1 | 10.0 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
administrative session | i | 0 | Connect to the administrative session of the remote computer. 0 - Do not use the administrative session. 1 - Connect to the administrative session. | Command line | /console, /admin | X | X | X | X | X | X | |||
allow desktop composition | i | 0 | Determines whether desktop composition (needed for Aero) is permitted when you log on to the remote computer. 0 - Disable desktop composition in the remote session. 1 - Desktop composition is permitted. | Yes | X | X | X | X | X | X | X | X | ||
allow font smoothing | i | 0 | Determines whether font smoothing may be used in the remote session. 0 - Disable font smoothing in the remote session. 1 - Font smoothing is permitted. | Yes | X | X | X | X | X | X | X | X | ||
alternate full address | s | Specifies an alternate name or IP address of the remote computer that you want to connect to. Will be overruled by RDP+. | No | X | X | X | X | X | ||||||
alternate shell | s | Specifies a program to be started automatically when you connect to a remote computer. The value should be a valid path to an executable file. This setting only works when connecting to servers. | Yes | /start | X | X | X | X | X | X | X | X | X | |
audiocapturemode | i | 0 | Determines how sounds captured (recorded) on the local computer are handled when you are connected to the remote computer. 0 - Do not capture audio from the local computer. 1 - Capture audio from the local computer and send to the remote computer. | Yes | X | X | X | X | X | |||||
audiomode | i | 0 | Determines how sounds on a remote computer are handled when you are connected to the remote computer. 0 - Play sounds on the local computer. 1 - Play sounds on the remote computer. 2 - Do not play sounds. | Yes | /[no]sound | X | X | X | X | X | X | X | X | X |
audioqualitymode | i | 0 | Determines the quality of the audio played in the remote session. 0 - Dynamically adjust audio quality based on available bandwidth. 1 - Always use medium audio quality. 2 - Always use uncompressed audio quality. | No | X | X | X | X | X | |||||
authentication level | i | 2 | Determines what should happen when server authentication fails. 0 - If server authentication fails, connect without giving a warning. 1 - If server authentication fails, do not connect. 2 - If server authentication fails, show a warning and allow the user to connect or not. 3 - Server authentication is not required. This setting will be overruled by RDP+. | Yes | X | X | X | X | X | X | X | X | ||
autoreconnect max retries | i | 20 | Determines the maximum number of times the client computer will try to reconnect to the remote computer if the connection is dropped. Note: The maximum value Remote Desktop can handle is 200. | No | X | X | X | X | X | X | X | X | X | |
autoreconnection enabled | i | 1 | Determines whether the client computer will automatically try to reconnect to the remote computer if the connection is dropped. 0 - Do not attempt to reconnect. 1 - Attempt to reconnect. | Yes | X | X | X | X | X | X | X | X | X | |
bandwidthautodetect | i | 1 | Enables the option for automatic detection of the network type. Used in conjunction with networkautodetect. Also see connection type. 0 - Do not enable the option for automatic network detection. 1 - Enable the option for automatic network detection. | Yes | X | X | X | |||||||
bitmapcachepersistenable | i | 1 | Determines whether bitmaps are cached on the local computer (disk-based cache). Bitmap caching can improve the performance of your remote session. 0 - Do not cache bitmaps. 1 - Cache bitmaps. | Yes | X | X | X | X | X | X | X | X | ||
bitmapcachesize | i | 1500 | Specifies the size in kilobytes of the memory-based bitmap cache. The maximum value is 32000. | No | X | X | X | X | X | X | X | X | X | |
compression | i | 1 | Determines whether the connection should use bulk compression. 0 - Do not use bulk compression. 1 - Use bulk compression. | No | X | X | X | X | X | X | X | X | X | |
connect to console | i | 0 | Connect to the console session of the remote computer. 0 - Connect to a normal session. 1 - Connect to the console screen. | Command line | /console, /admin | X | X | X | ||||||
connection type | i | 2 | Specifies pre-defined performance settings for the Remote Desktop session. 1 - Modem (56 Kbps). 2 - Low-speed broadband (256 Kbps - 2 Mbps). 3 - Satellite (2 Mbps - 16 Mbps with high latency). 4 - High-speed broadband (2 Mbps - 10 Mbps). 5 - WAN (10 Mbps or higher with high latency). 6 - LAN (10 Mbps or higher). 7 - Automatic bandwidth detection. Requires bandwidthautodetect. By itself, this setting does nothing. When selected in the RDC GUI, this option changes several performance related settings (themes, animation, font smoothing, etcetera). These separate settings always overrule the connection type setting. | Yes | X | X | X | X | X | |||||
desktopheight | i | 600 | The height (in pixels) of the remote session desktop. | Limited | /h | X | X | X | X | X | X | X | X | X |
desktop size id | i | 0 | Specifies pre-defined dimensions of the remote session desktop. 0 - 640x480. 1 - 800x600. 2 - 1024x768. 3 - 1280x1024. 4 - 1600x1200. This setting is ignored when either /w and /h, or desktopwidth and desktopheight are already specified. | Yes | X | X | X | X | X | X | X | X | X | |
desktopwidth | i | 800 | The width (in pixels) of the remote session desktop. | Limited | /w | X | X | X | X | X | X | X | X | X |
devicestoredirect | s | Determines which supported Plug and Play devices on the client computer will be redirected and available in the remote session. No value specified - Do not redirect any supported Plug and Play devices. * - Redirect all supported Plug and Play devices, including ones that are connected later. DynamicDevices - Redirect any supported Plug and Play devices that are connected later. The hardware ID for one or more Plug and Play devices - Redirect the specified supported Plug and Play device(s). | Yes | /[no]drives | X | X | X | X | X | X | X | |||
disable ctrl+alt+del | i | 1 | Determines whether you have to press CTRL+ALT+DELETE before entering credentials after you are connected to the remote computer. 0 - CTRL+ALT+DELETE is required before logging in. 1 - CTRL+ALT+DELETE is not required. You can logon immediately. Note: When disabled, this setting will also delay the autologin until the user has pressed CTRL+ALT+DELETE. | No | X | X | X | X | X | X | X | X | X | |
disable full window drag | i | 1 | Determines whether window content is displayed when you drag the window to a new location. 0 - Show the contents of the window while dragging. 1 - Show an outline of the window while dragging. | Yes | X | X | X | X | X | X | X | X | X | |
disable menu anims | i | 1 | Determines whether menus and windows can be displayed with animation effects in the remote session. 0 - Menu and window animation is permitted. 1 - No menu and window animation. | Yes | X | X | X | X | X | X | X | X | X | |
disable themes | i | 0 | Determines whether themes are permitted when you log on to the remote computer. 0 - Themes are permitted. 1 - Disable theme in the remote session. | Yes | X | X | X | X | X | X | X | X | X | |
disable wallpaper | i | 1 | Determines whether the desktop background is displayed in the remote session. 0 - Display the wallpaper. 1 - Do not show any wallpaper. | Yes | /[no]wallpaper | X | X | X | X | X | X | X | X | X |
disableconnectionsharing | i | 0 | Determines whether a new Terminal Server session is started with every launch of a RemoteApp to the same computer and with the same credentials. 0 - No new session is started. The currently active session of the user is shared. 1 - A new login session is started for the RemoteApp. | No | X | X | X | X | X | X | X | |||
disableremoteappcapscheck | i | 0 | Specifies whether the Remote Desktop client should check the remote computer for RemoteApp capabilities. 0 - Check the remote computer for RemoteApp capabilities before logging in. 1 - Do not check the remote computer for RemoteApp capabilities.Note: This setting must be set to 1 when connecting to Windows XP SP3, Vista or 7 computers with RemoteApps configured on them. This is the default behavior of RDP+. | No | X | X | X | X | X | |||||
displayconnectionbar | i | 1 | Determines whether the connection bar appears when you are in full screen mode. 0 - Do not show the connection bar. 1 - Show the connection bar. Will be overruled by RDP+ when using the parameter /noclose. | Yes | X | X | X | X | X | X | X | X | X | |
domain | s | Specifies the name of the domain of the user. Will be ignored/overruled by RDP+. | Yes | /u, /domain | X | X | X | X | X | X | X | X | X | |
drivestoredirect | s | Determines which local disk drives on the client computer will be redirected and available in the remote session. No value specified - Do not redirect any drives. * - Redirect all disk drives, including drives that are connected later. DynamicDrives - Redirect any drives that are connected later. The drive and labels for one or more drives - Redirect the specified drive(s). | Yes | /[no]drives | X | X | X | X | X | X | X | |||
enablecredsspsupport | i | 1 | Determines whether Remote Desktop will use CredSSP for authentication if it's available. 0 - Do not use CredSSP, even if the operating system supports it. 1 - Use CredSSP, if the operating system supports it. | No | X | X | X | X | X | X | X | |||
enablesuperpan | i | 0 | Determines whether SuperPan is enabled or disabled. SuperPan allows the user to navigate a remote desktop in full-screen mode without scroll bars, when the dimensions of the remote desktop are larger than the dimensions of the current client window. The user can point to the window border, and the desktop view will scroll automatically in that direction. 0 - Do not use SuperPan. The remote session window is sized to the client window size. 1 - Enable SuperPan. The remote session window is sized to the dimensions specified through /w and /h, or through desktopwidth and desktopheight. | No | X | X | X | X | X | |||||
full address | s | Specifies the name or IP address (and optional port) of the remote computer that you want to connect to. Will be ignored by RDP+. | Yes | /v | X | X | X | X | X | X | X | X | X | |
gatewaycredentialssource | i | 4 | Specifies the credentials that should be used to validate the connection with the RD Gateway. 0 - Ask for password (NTLM). 1 - Use smart card. 4 - Allow user to select later. | Yes | X | X | X | X | X | X | X | |||
gatewayhostname | s | Specifies the hostname of the RD Gateway. | Yes | /rdgateway | X | X | X | X | X | X | X | |||
gatewayprofileusagemethod | i | 0 | Determines the RD Gateway authentication method to be used. 0 - Use the default profile mode, as specified by the administrator. 1 - Use explicit settings. | Yes | X | X | X | X | X | X | X | |||
gatewayusagemethod | i | 4 | Specifies if and how to use a Remote Desktop Gateway (RD Gateway) server. 0 - Do not use an RD Gateway server. 1 - Always use an RD Gateway, even for local connections. 2 - Use the RD Gateway if a direct connection cannot be made to the remote computer (i.e. bypass for local addresses). 3 - Use the default RD Gateway settings. 4 - Do not use an RD Gateway server. 0 and 4 have the same effect, but setting the method to 4 also sets the option for bypassing local addresses in the Remote Desktop user interface. | Yes | X | X | X | X | X | X | X | |||
keyboardhook | i | 2 | Determines how Windows key combinations are applied when you are connected to a remote computer. 0 - Windows key combinations are applied on the local computer. 1 - Windows key combinations are applied on the remote computer. 2 - Windows key combinations are applied in full-screen mode only. | Yes | X | X | X | X | X | X | X | X | X | |
negotiate security layer | i | 1 | Determines whether the level of security is negotiated or not. 0 - Security layer negotiation is not enabled and the session is started by using Secure Sockets Layer (SSL). 1 - Security layer negotiation is enabled and the session is started by using x.224 encryption. | No | X | X | X | X | X | X | X | |||
networkautodetect | i | 1 | Determines whether to use auomatic network bandwidth detection or not. Requires the option bandwidthautodetect to be set and correlates with connection type 7. 0 - Use automatic network bandwitdh detection. 1 - Do not use automatic network bandwitdh detection. | Yes | X | X | X | |||||||
password 51 | b | The user password in a binary hash value. Will be overruled by RDP+. | Yes | /p, /pe, /i | X | X | X | X | X | X | X | X | X | |
pinconnectionbar | i | 1 | Determines whether or not the connection bar should be pinned to the top of the remote session upon connection when in full screen mode. 0 - The connection bar should not be pinned to the top of the remote session. 1 - The connection bar should be pinned to the top of the remote session. | No | X | X | X | X | X | X | X | X | X | |
prompt for credentials | i | 0 | Determines whether Remote Desktop Connection will prompt for credentials when connecting to a remote computer for which the credentials have been previously saved. 0 - Remote Desktop will use the saved credentials and will not prompt for credentials. 1 - Remote Desktop will prompt for credentials. This setting is ignored by RDP+. | Yes | X | X | X | X | X | X | X | |||
prompt for credentials on client | i | 0 | Determines whether Remote Desktop Connection will prompt for credentials when connecting to a server that does not support server authentication. 0 - Remote Desktop will not prompt for credentials. 1 - Remote Desktop will prompt for credentials. This setting is ignored by RDP+. | No | X | X | X | X | X | X | ||||
promptcredentialonce | i | 1 | When connecting through an RD Gateway, determines whether RDC should use the same credentials for both the RD Gateway and the remote computer. 0 - Remote Desktop will not use the same credentials . 1 - Remote Desktop will use the same credentials for both the RD gateway and the remote computer. | Yes | X | X | X | X | X | X | ||||
public mode | i | 0 | Determines whether Remote Desktop Connection will be started in public mode. 0 - Remote Desktop will not start in public mode . 1 - Remote Desktop will start in public mode and will not save any user data (credentials, bitmap cache, MRU) on the local machine. This setting is incompatible with autologin and some other features and therefore ignored by RDP+. | Command line | X | X | X | X | X | |||||
redirectclipboard | i | 1 | Determines whether the clipboard on the client computer will be redirected and available in the remote session and vice versa. 0 - Do not redirect the clipboard. 1 - Redirect the clipboard. | Yes | X | X | X | X | X | X | X | |||
redirectcomports | i | 0 | Determines whether the COM (serial) ports on the client computer will be redirected and available in the remote session. 0 - The COM ports on the local computer are not available in the remote session. 1 - The COM ports on the local computer are available in the remote session. | Yes | X | X | X | X | X | X | X | X | X | |
redirectdirectx | i | 1 | Determines whether DirectX will be enabled for the remote session. 0 - Do not enable DirectX rendering. 1 - Enable DirectX rendering in the remote session. | No | X | X | X | X | X | |||||
redirectdrives | i | 0 | Determines whether local disk drives on the client computer will be redirected and available in the remote session. 0 - The drives on the local computer are not available in the remote session. 1 - The drives on the local computer are available in the remote session. Note: This setting is replaced by drivestoredirect from RDC 6.0 onward. | Yes | /[no]drives | X | X | |||||||
redirectposdevices | i | 0 | Determines whether Microsoft Point of Service (POS) for .NET devices connected to the client computer will be redirected and available in the remote session. 0 - The POS devices from the local computer are not available in the remote session. 1 - The POS devices from the local computer are available in the remote session. | No | X | X | X | X | X | X | X | |||
redirectprinters | i | 1 | Determines whether printers configured on the client computer will be redirected and available in the remote session. 0 - The printers on the local computer are not available in the remote session. 1 - The printers on the local computer are available in the remote session. | Yes | /[no]printers | X | X | X | X | X | X | X | X | X |
redirectsmartcards | i | 1 | Determines whether smart card devices on the client computer will be redirected and available in the remote session. 0 - The smart card device on the local computer is not available in the remote session. 1 - The smart card device on the local computer is available in the remote session. | Yes | X | X | X | X | X | X | X | X | X | |
remoteapplicationcmdline | s | Optional command line parameters for the RemoteApp. | No | X | X | X | X | X | X | X | ||||
remoteapplicationfile | s | Specifies a file to be opened on the remote computer by the RemoteApp. Note: For local files to be opened, you must also enable drive redirection for (at least) the source drive. | No | /remotefile | X | X | X | X | X | X | X | |||
remoteapplicationexpandcmdline | i | 1 | Determines whether environment variables contained in the RemoteApp command line parameter should be expanded locally or remotely. 0 - Environment variables should be expanded to the values of the local computer. 1 - Environment variables should be expanded on the remote computer to the values of the remote computer. | No | X | X | X | X | X | X | X | |||
remoteapplicationexpandworkingdir | i | 0 | Determines whether environment variables contained in the RemoteApp working directory parameter should be expanded locally or remotely. 0 - Environment variables should be expanded to the values of the local computer. 1 - Environment variables should be expanded on the remote computer to the values of the remote computer. Note: The RemoteApp working directory is specified through the shell working directory parameter. | No | X | X | X | X | X | X | X | |||
remoteapplicationicon | s | Specifies the file name of an icon file to be displayed in the Remote Desktop interface while starting the RemoteApp. By default RDC will show the standard Remote Desktop icon. Note: Only .ico files are supported. | No | X | X | X | X | X | X | X | ||||
remoteapplicationmode | i | 0 | Determines whether a RemoteApp shoud be launched when connecting to the remote computer. 0 - Use a normal session and do not start a RemoteApp. 1 - Connect and launch a RemoteApp. | No | /remoteapp | X | X | X | X | X | X | X | ||
remoteapplicationname | s | Specifies the name of the RemoteApp in the Remote Desktop interface while starting the RemoteApp. | No | X | X | X | X | X | X | X | ||||
remoteapplicationprogram | s | Specifies the alias or executable name of the RemoteApp. | No | /remoteapp | X | X | X | X | X | X | ||||
screen mode id | i | 2 | Determines whether the remote session window appears full screen when you connect to the remote computer. 1 - The remote session will appear in a window. 2 - The remote session will appear full screen. | Yes | /f[ullscreen], /fit, /max, /w, /h | X | X | X | X | X | X | X | X | X |
server port | i | 3389 | Defines an alternate default port for the Remote Desktop connection. Will be overruled by any port number appended to the server name. | Command line | /v | X | X | X | X | X | X | X | X | X |
session bpp | i | 32 | Determines the color depth (in bits) on the remote computer when you connect. 8 - 256 colors (8 bit). 15 - High color (15 bit). 16 - High color (16 bit). 24 - True color (24 bit). 32 - Highest quality (32 bit). | Yes | X | X | X | X | X | X | X | X | X | |
shell working directory | s | The working directory on the remote computer to be used if an alternate shell is specified. | Yes | X | X | X | X | X | X | X | X | X | ||
smart sizing | i | 0 | Determines whether the client computer should scale the content on the remote computer to fit the window size of the client computer when the window is resized. 0 - The client window display will not be scaled when resized. 1 - The client window display will be scaled when resized. | No | X | X | X | X | X | X | X | X | X | |
span monitors | i | 0 | Determines whether the remote session window will be spanned across multiple monitors when you connect to the remote computer. 0 - Monitor spanning is not enabled. 1 - Monitor spanning is enabled. Note: When using Remote Desktop Connection 7 (Windows 7/2008), the use multimon setting is recommended. | Yes | /span | X | X | X | X | X | X | X | ||
superpanaccelerationfactor | i | 1 | Specifies the number of pixels that the screen view scrolls in a given direction for every pixel of mouse movement by the client when in SuperPan mode | No | X | X | X | X | X | |||||
usbdevicestoredirect | s | Determines which supported RemoteFX USB devices on the client computer will be redirected and available in the remote session when you connect to a remote session that supports RemoteFX USB redirection. No value specified - Do not redirect any supported RemoteFX USB devices. * - Redirect all supported RemoteFX USB devices for redirection that are not redirected by high-level redirection mechanisms. {Device Setup Class GUID} - Redirect all supported RemoteFX USB devices that are members of the specified device setup class. USBInstanceID - Redirect the supported RemoteFX USB device specified by the given instance ID. -USBInstanceID - Do not redirect the supported RemoteFX USB device specified by the given instance ID, even if the device is in a device setup class that is redirected. | Yes | X | X | X | X | |||||||
use multimon | i | 0 | Determines whether the session should use true multiple monitor support when connecting to the remote computer. 0 - Do not enable multiple monitor support. 1 - Enable multiple monitor support. | Yes | /multimon | X | X | X | X | X | ||||
username | s | Specifies the name of the user account that will be used to log on to the remote computer. Will be ignored by RDP+. | Yes | /u | X | X | X | X | X | X | X | X | X | |
videoplaybackmode | i | 1 | Determines whether RDC will use RDP efficient multimedia streaming for video playback. 0 - Do not use RDP efficient multimedia streaming for video playback. 1 - Use RDP efficient multimedia streaming for video playback when possible. | No | X | X | X | X | X | |||||
winposstr | s | 0,3,0,0,800,600 | Specifies the position and dimensions of the session window on the client computer. Will be overruled by RDP+. | No | /f[ullscreen], /fit, /max, /w, /h, /pos | X | X | X | X | X | X | X | X | X |
5.1 : Included with Windows XP.
5.2 : Included with Windows 2003.
6.0 : Included with Windows Vista. Available for Windows XP SP2 and Windows 2003 SP1/SP2.
6.1 : Included with Windows 2008, Windows Vista SP1 and Windows XP SP3. Available for Windows XP SP2.
7.0 : Included with Windows 2008 R2 and Windows 7. Available for Windows XP SP3 and Windows Vista SP1/SP2.7.1 : Included with Windows 7 SP1 and Windows 2008 R2 SP1.
8.0 : Included with Windows 8 and Windows 2012. Available for Windows 7 SP1 and Windows 2008 R2 SP1.
8.1 : Included with Windows 8.1 and Windows 2012 R2. Available for Windows 7 SP1 and Windows 2008 R2 SP1.
10.0: Included with Windows 10.